031ddc0420
* Fixed typo: access --> accessed * Fixed typo: 'access restricted' --> 'access-restricted' * Fixed typo: added 'be' * Fixed typo: added 'a' * Fixed typo: 'Asssistants' --> 'Assistants' * Fixed typo: 'overpressure' --> 'overpressurize' * Fixed typo: 'outisde' --> 'outside' * Fixed typo: added a comma * Fixed typo: added a comma * Fixed typo: 'aformentioned' --> 'aforementioned' * Fixed typo: added a comma * Fixed typo: added a comma * Fixed typo: 'radition' --> 'radiation' * Fixed typo: 'turing' --> 'turning' * Fixed typo: 'appropiate' --> 'appropriate' * Fixed typo: added 'the' * Fixed typo: added a dot to ellipsis * Fixed typo: 'aswell' --> 'as well' * Fixed typo: 'permanant' --> 'permanent' * Fixed typo: 'flammmable' --> 'flammable' * Fixed typo: 'recommmended' --> 'recommended' * Fixed typo: 'recipies' --> 'recipes' * Fixed typo: 'pre-adminsitered' --> 'pre-administered' * Fixed typo: 'resusitated' --> 'resuscitated' * Fixed typo: 'types' --> 'type' * Fixed typo: `someones` --> `someone's` * Fixed typo: 'appy' --> 'apply' * Fixed typo: added 'to' * Fixed typo: 'CentCom' --> 'CentComm' (as per https://github.com/space-wizards/space-station-14/pull/29217) * Fixed typo: 'emergencys' --> 'emergencies' * Fixed typo: removed a dash
41 lines
2.4 KiB
XML
41 lines
2.4 KiB
XML
<Document>
|
|
# Network Configurator
|
|
The network configurator allows you to manipulate device lists, link devices together and configure accesses for airlocks through door electronics.
|
|
<Box>
|
|
<GuideEntityEmbed Entity="NetworkConfigurator"/>
|
|
</Box>
|
|
The configurator has two modes: List and Link. You can press [color=gray]Alt+Z[/color] or [color=gray]Alt+Y[/color] to switch between them.
|
|
|
|
## List Mode
|
|
In list mode you can click on network devices to save them on the configurator and then on a network device that has a device list like the [color=#a4885c]Air Alarm[/color].
|
|
|
|
When clicking on a device like the Air Alarm, a UI will open, displaying the list currently saved on the device and buttons to manipulate that list.
|
|
|
|
You can:
|
|
- Replace the current list with the one saved on the configurator
|
|
- Add the list on the configurator to the current one
|
|
- Clear the current list
|
|
- Copy the current list to the configurator
|
|
- Visualize the connections to the devices on the current list
|
|
|
|
Pressing [color=gray][keybind="ActivateItemInHand"][/color] opens the list saved on the configurator where you can remove saved devices.
|
|
|
|
## Link Mode
|
|
With link mode, you can click on a device that is capable of device linking and then click on any other device that is either a sink or source.
|
|
|
|
For example, first clicking on a source, like a [color=#a4885c]signal button[/color], and then on sink, like a [color=#a4885c]small light[/color], opens a UI that displays the source ports on the left side and the sink ports on the right.
|
|
|
|
Now, you can either click [color=gray]Link Defaults[/color] to link the default ports for a source + sink combination, or press on a source port and then a sink port to connect them.
|
|
|
|
An example of a default link for the aforementioned combinaton of devices would be:
|
|
<Box>
|
|
[color=cyan]Pressed 🠒 Toggle[/color]
|
|
</Box>
|
|
When you're done connecting the ports you want, you can click on [color=gray]OK[/color] to close the UI.
|
|
|
|
You can quickly link multiple devices to their default port by first clicking on a device that can be linked and then using [color=gray]Alt+Left Mouse button[/color] on the devices you want to link together.
|
|
|
|
## Airlock Access
|
|
To configure an airlock's access, simply take the airlock's door electronics and interact with it using a network configurator (or multitool). Select the accesses you want, insert the door electronics into an airlock frame, and construct to finish!
|
|
</Document>
|