# Network Configurator The network configurator allows you to manipulate device lists and link devices together. The configurator has two modes: List and Link. You can press [color=gray]Alt+Z[/color] or [color=gray]Alt+Y[/color] to switch between them. ## List Mode In list mode you can click on network devices to save them on the configurator and then on a network device that has a device list like the [color=#a4885c]Air Alarm[/color]. When clicking on a device like the Air Alarm, a UI will open displaying the list currently saved on the device and buttons to manipulate that list. You can: - Replace the current list with the one saved on the configurator - Add the list on the configurator to the current one - Clear the current list - Copy the current list to the configurator - Visualize the connections to the devices on the current list Pressing [color=gray]z[/color] or [color=gray]y[/color] opens the list saved on the configurator where you can remove saved devices. ## Link Mode With link mode you can click on a device that is capable of device linking and click on any other device that is either a sink or source. For example, first clicking on a source like a [color=#a4885c]signal button[/color] and then on sink like a [color=#a4885c]small light[/color] opens a UI that displays the source ports on the left side and the sink ports on the right. Now you can eiter click [color=gray]link defaults[/color] to link the default ports for a source + sink combination or press on a source and then a sink port to connect them. An example of a default link for the aformentioned combinaton of devices would be: [color=cyan]Pressed 🠒 Toggle[/color] When you're done connecting the ports you want you can click on [color=gray]ok[/color] to close the UI. You can quickly link multiple devices to their default port by first clicking on a device that can be linked and then using [color=gray]alt+left mouse button[/color] on the devices you want to link together.